Custom® VBFG50 VersaBond Flex® Fortified Thin­-Set Mortar, 50 Lb, Gray

A professional formula, all-purpose mortar with high flexibility and bond strength. With outstanding  dhesion to plywood subfloors, this mortar can also be used for porcelain and glass tile installations. Use it for interior or exterior floors, countertops and walls.

• 50 LB Bag
• Gray
• High bond strength and flexibility
• Excellent for setting porcelain and glass tile
• Exceptional adhesion to plywood subfloors.

Suitable Tile Types:

• Vitreous, semi-vitreous or non-vitreous tile: ceramic, mosaic, quarry, cement body tile
• Impervious porcelain and glass tile
• Brick and thin brick
• Cement-based precast terrazzo
• Natural stone tile.

Benefits of Product in the Installation:

• High bond strength and flexibility
• Excellent adhesion to plywood subfloors
• Excellent for porcelain and glass tile installations
• Excellent handling characteristics through extended open and adjustment times
• Approved for industry-recommended interior and exterior applications
• Exceeds ANSI A118.4E and A118.11 standards without the need for additives.

Instructions:

• Surfaces must be structurally sound. Remove all grease, oil, dirt, curing compounds, sealers, adhesives or any other contaminant that would prevent a good bond. Glossy or painted surfaces must be sanded, or abraded, and stripped of all contaminants. Concrete must be cured 28 days and accept water penetration. Concrete must be free of efflorescence and not subject to hydrostatic pressure. Concrete slabs should have a coarse finish to enhance the bond. Plywood flooring including those under resilient flooring must be structurally sound and meet all ANSI and deflection requirements. For questions about proper subfloor installation, call Technical Services. Smooth concrete surfaces, existing glazed tile, terrazzo, or polished stone should be scarified. Sheet vinyl must be well bonded and stripped of old finish. Roughen the surface by sanding or abrading, then rinse and allow to dry. Expansion joints should never be bridged with setting material. Do not sand flooring materials containing asbestos. Ambient temperature should be maintained above 50° F (10° C) or below 100° F (38° C) for 72 hours to achieve proper bond.