| Management number | 208120228 | Release Date | 2026/03/22 | List Price | $36.00 | Model Number | 208120228 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
STREET/TRACK APPLICATIONS (OCCASIONAL TRACK USE – CIRCUIT / TIME ATTACK / ROAD RACING)The Super Copper Kit brings a new level of performance to the street and track.It’s built with the highest copper content you’ll find in any organic clutch on the market — giving you a better grip than OEM, better heat tolerance, and more consistent performance on and off the track. Backed by a reinforced steel plate and a copper-loaded organic facing, it’s designed to hold more power without giving up smooth street drivability.This kit uses our reinforced steel-backed, copper-loaded organic disc paired with a heavy-duty single diaphragm pressure plate — delivering smooth engagement you can daily drive, and the grip you need when you push it. It’s the ideal setup for stock, tuned street cars and basic bolt-on builds that want more without giving up drivability.Like all of our sprung kits, the Super Copper features our patented fully enclosed spring retainer system — protecting you from failures that can cause serious transmission or engine damage, a problem we guarantee you’ll see with other brands.Every kit is hand-assembled and signed off after multiple quality checks by our senior engineering team (50+ years combined experience), making sure you’re getting real, tested performance — not guesswork.Pressure Plate FeaturesDuctile Iron Friction Plate for heat controlReinforced Heavy-Duty Drive Straps4-Stage Heat Treated Diaphragm Spring for durabilityAmerican-Grade Rivets100% Dynamically Spin Balanced for smooth operationClutch Disc FeaturesSteel-Backed, Super Copper-Loaded Organic Friction MaterialFully Enclosed Patented Spring Retainer System for long-term protectionSprung Hub for easier, smoother engagementAmerican-Grade Rivets for maximum strengthNote: The Super Copper Series is your go-to clutch for daily-driven, tuned, or bolt-on builds. It drives smooth, handles stock-mid power, and stays strong when it heats up.Torque Holding Capacity: 3612008+ Honda Accord 2.4L MUST USE HONDATA FLASH PROWhat’s IncludedSuper Copper Organic Clutch DiscSingle Diaphragm HD Pressure PlatePilot Bearing / Bushing (when applicable)Clutch Alignment ToolConventional Release BearingIncludes Lightened FlywheelBreak-in Requirements 500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable).Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.SFI Spec 1.1 Replacement Flywheels and Clutch Assemblies California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov Vehicle Application:Fits Honda Accord 2003-2012 (2.4L DOHC 4cyl K24)Fits Acura ILX 2013-2015 (2.4L DOHC 4cyl K24)Fits Acura TSX 2004-2014 (2.4L DOHC 4cyl K24)Fits Honda Civic Si 2012-2015 (2.4L DOHC 4cyl K24Z7)Note: Unlike many clutch and flywheel sets, this genuine 'direct fit' kit requires an ECU flash. Be sure to use the entire kit without reusing any old components.
| Brand | Action Clutch |
|---|---|
| Item Weight | 13.2 pounds |
| Manufacturer | ACTION CLUTCH |
| OEM Part Number | HCK1001 52252404 HCK1005 K70381-02 NU31651 08-048, 22810-PPT-003 22200-RAA-003 22100-RAA-003 |
| Special Features | 𝐂𝐋𝐔𝐓𝐂𝐇 𝐃𝐈𝐒𝐂 𝐒𝐓𝐘𝐋𝐄: Stage 2 High Torque Full Face Sprung Hub, 𝐈𝐍𝐏𝐔𝐓 𝐒𝐇𝐀𝐅𝐓 𝐃𝐈𝐀𝐌𝐄𝐓𝐄𝐑: 1-1/32 in, 𝐈𝐍𝐏𝐔𝐓 𝐒𝐏𝐋𝐈𝐍𝐄 𝐐𝐔𝐀𝐍𝐓𝐈𝐓𝐘: 24, 𝐏𝐑𝐄𝐒𝐒𝐔𝐑𝐄 𝐏𝐋𝐀𝐓𝐄 𝐓𝐘𝐏𝐄: HD Reinforced Diaphragm, 𝐓𝐘𝐏𝐄: Single Disc Clutch Kits |
| Item model number | ACR-0595-SC |
| Manufacturer Part Number | ACR-0595 |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form