TOGGLER Snap Toggle Bolts for Drywall Molly (10-Pack)

【High Load Capacity】The 1/4 inch toggle bolt anchor comes in a pack of 10 bolts and 10 anchors. It is ideal for hanging or supporting flat-screen TVs, handrails, large storage cabinets, and other large furniture. It can be used on drywall, tile, concrete block, plaster, etc. It is a very versatile product that can be used for a variety of applications.

【Self-Adjusting】This product forms the anchor shape, providing more effective security and better results. It adapts to various base thicknesses, such as gypsum board, ceiling board, and cinder block, and adapts to the installed surface.

*****************************************

【How to Install】

1. Use a 13mm drill bit to drill a hole for the toggle channel. Flip the channel flat along the plastic strap and pass the channel through the hole. Pull the ring of the toggle strap and slide the plastic cap along the strap until the cap is flush with the wall.

2. Make sure the channel is installed flat against the inner wall. Pull the ring side of the toggle and slide the plastic cap along the strap until the cap and flange are flush with the wall. Apply pressure to the cap and flange and break the toggle strap.

3. Place your thumb between the plastic straps and apply pressure to the cap and flange. Bend the straps up and down until each strap comes off. Place the fixture or mounting bracket over the flange and screw in the bolt to secure it.

4. Place the fixture over the flange and insert the bolt from the fixture hole into the toggle. Tighten until it fits snugly into the fixture.