Tripp Lite Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Gray, 75 ft. (22.86 m)

The Tripp Lite N001-075-GY is a 75 foot Cat5e Ethernet cable that gives you a straightforward way to link network hardware over longer runs without signal loss or connector damage. It comes ready with RJ45 male connectors on both ends, so you can plug directly into a switch, router, patch panel, or any other standard network port and get to work right away.

Each plug is molded with a snagless hood that protects the locking tab while you thread the cable through tight spaces or dense wiring bays. Integral strain relief built into the molding keeps everyday bends from stressing the internal conductors, so the cable stays dependable even after multiple installations or re-routing jobs.

Inside the gray PVC jacket you will find four pairs of stranded, unshielded twisted conductors that are rated for 350 MHz performance. That bandwidth supports up to 1 Gbps data rates and delivers a clean signal for voice, video, or large file transfers. The cable also carries up to 30 watts of Power over Ethernet, meeting IEEE 802.3ab and IEEE 802.3at standards, which makes it a practical run for PoE-enabled access points, IP phones, and security cameras.

Use this 75 foot length when you need to span a hallway, reach from a floor rack to a ceiling-mounted wireless access point, or connect devices on opposite sides of a server room. The cable works seamlessly with both Cat5 and Cat5e equipment, so it drops into existing networks without compatibility concerns. If your layout changes or you need color-coded runs, the same series is available in other lengths and colors.

Highlights:

• 75 ft (22.86 m) reach handles long device runs within homes, offices, or data centers
• Snagless RJ45 molded connectors with integral strain relief help prevent broken latch tabs
• 350 MHz bandwidth supports 1 Gbps Ethernet throughput
• Gray PVC jacket with 4-pair stranded UTP construction adds flexibility and durability
• Complies with IEEE 802.3ab Gigabit Ethernet and IEEE 802.3at PoE+ (30 W) standards
• Backward compatible with Cat5 networks and offered in additional lengths and colors